USER1 ACCOUNT SCREENS AND OPTIONS

5.0        USER1 ACCOUNT SCREENS AND OPTIONS

8.1       After successfully logging onto the tester under the “user1” account, the HP VUE

            Environment screen will be displayed.  

8.2              Click the mouse on the arrow above the “HP 3070” button on the Workspace Manager bar displayed at the bottom of the screen.  This will cause the “HP 3070 Programs” menu bar to be displayed, refer to figure 6 above.

8.3              Click the mouse on the “BT-BASIC” icon on the HP 3070 Programs menu bar.

8.4              This will open a “BT-BASIC” window similar to that shown in figure 7 below.

Warning: Unix is a case sensitive programming language, type all commands in the case shown.  The BT-BASIC window is only active if the mouse is moved to within the window.  You will notice that the window frame will become highlighted when the mouse moves into the window.

8.5              Move the mouse into this BT-BASIC window, type  testhead is 1 on the command line and press the “ENTER” key on the keyboard.

8.6              An “Operator Keypad" window will appear on the screen, refer to figure 8 below.

8.7              Refer to the board test procedure for the directory path information required to get the test program. All test programs reside under the directory path /hp3070/boards.

Example: /hp3070/boards/aspect/main