TEST STATION READINES – System Selftest Program

12.0     TEST STATION READINES – System Selftest Program

12.1          The system selftest program can only be executed while logged in under the service1

account.

12.2          At the system log in window, refer to figure 3, type in service1 and click the mouse

on the “OK” button displayed on the screen or press the “ENTER” key on the keyboard.

12.3          The system will then prompt you to enter the proper password for the account that you

are logging in under.  Click the mouse on the “OK” button displayed on the screen or press the “ENTER” key on the keyboard.

12.4     Place the system self test fixture, refer to figure 10, onto either bank 1 or 2 of the testhead.  Orient the test fixture so that the test points are towards the center of the testhead.    Ensure that the protective cover is installed over the unused bank.

FIGURE 10

12.5     A “diagnostics” window will appear on the screen, refer to figure 11.

12.6          Follow the on screen instructions to highlight the “System Diagnostics” selection.

12.7          Click the mouse on the “Enter” softkey, or press the F1 keyboard key.

12.8          This will bring up the “System Diagnostics” window, reference figure 12.